How To Replace Car Battery
How To Replace Car Battery

How To Replace Car Battery Yourself: 7 Simple Steps To Follow

A car battery doesn’t go to last forever. No matters how much careful you were! Still, you need to know how to replace car battery. There are a few ways to understand when you need to replace your car battery. You may notice that your headlight dimming, long time to charge, need a jump-start then it’s time to replace your car battery. In this article, I will share the easiest method of replacing car battery yourself!

If you are a regular car owner you may know there is a sticker on your car battery which represents the battery performance, how long will it run properly and much more important information of the battery. I will go through a simple process how to change car battery which is only a matter of time.

HOW TO REPLACE CAR BATTERY EASILY

1

GET MATCHING BATTERy

To replace the old battery you must need to get the same one or related to the battery which will match your older battery, the place, and more technical parts. Before getting started to make sure you bought the right battery for your car system.

2

TURN CAR ENGINE OFF

The beginning of the journey make sure your car is nicely parked and the engine is shut down properly. Otherwise, your car can get technical damages which could count a few bucks to be solved.

3

OPEN THE HOOd

A car battery is already setup(ed) in the hood of your car. Open your hood carefully! The hood section is build to give the safest place for your battery and other important parts of a car. Make sure to press the hood opening button and carefully open it.

4

REMOVING CABLEs

There are a bunch of cables connected with your car battery terminals. Take a note regarding the negative and the positive terminal. 1st of all remove both negative and positive terminal carefully and switch the battery connection off properly.

5

REMOVING old battery

Once cables removing is done you are all set to replacing car battery. Simply remove the battery from the tray. Make sure you removed the bolts, screws properly. If not it may cause physical issues of the tray.

6

PLACE THE NEW BATTERy

After removing the old battery, it’s time to place the brand new battery in the tray. Make sure you place the new battery in the same direction as the older one. It will make things smoother installing the new battery for your car.

7

REPLACE BATTERY CABLEs

As you disconnected the old battery cables just copy the process and connect the cables properly. Make sure the negative terminal & positive terminal is connected correctly. If you disconnected any other cables make sure to connect them as well.

 Now properly screw the battery so that it can’t move or it’s loosened. Now you are all set to enjoy the brand new battery installed.

THINGS TO BE CAREFUL WHILE REPLACING CAR BATTERy

  • Get the engine off properly
  • Make a note on the negative & positive terminal
  • Connect the wires correctly
  • Clean the tray properly
  • Place battery as the older one
  • Screw bolts tightly
  • Make sure the cables are not loosen
  • Make sure the wires are not cut off
  • Charge the new battery properly

CONCLUSION

Those are the simple ways how to replace car battery by yourself. It will help you save extra bucks that you may be needed to hire a professional to replace car battery. Most of the people feel annoying to change the old battery by themselves. I hope this guide will bring you a confidence in changing it properly by yourself. Make sure you change your car battery every five years as metrics show that your car battery will stop giving expected performances after 5 years or so.

You may also read: 5 common mistakes why car battery dies

About the author

Automotive Pick

Automotive Pick is world's Best Automotive resource across online. Get the latest tips & tricks on the car, motorbike, bus, truck etc from our blog

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *